Manipulating Electron Redistribution in Ni2 P for Enhanced Alkaline Seawater Electrolysis.

Developing bifunctional electrocatalyst for seawater splitting remains a persistent challenge. Herein, an approach is proposed through density functional theory (DFT) preanalysis to manipulate electron redistribution in Ni2 P addressed by cation doping and vacancy engineering. The needle-like Fe-doped Ni2 P with P vacancy (Fe-Ni2 Pv) is successfully synthesized on nickel foam, exhibiting a superior bifunctional hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic activity for seawater electrolysis in alkaline condition. As a result, bifunctional Fe-Ni2 Pv achieves the industrially required current densities of 1.0 and 3.0 A cm-2 at low voltages of 1.68 and 1.73 V, respectively, for seawater splitting at 60 °C in 6.0 m KOH circumstances. The theoretical calculation and the experimental results collectively reveal the reasons for the enhancement of catalyst activity. Specifically, Fe doping and P vacancies can accelerate the reconstruction of OER active species and optimize the hydrogen adsorption free energy (ΔGH* ) for HER. In addition, the active sites of Fe-Ni2 Pv are identified, where P vacancies greatly improve the electrical conductivity and Ni sites are the dominant OER active centers, meanwhile Fe atoms as active centers for the HER. The study provides a deep insight into the exploration for the enhancement of activity of nickel-based phosphide catalysts and the identification of their real active centers.

Diluting the Resistance of Built-in Electric Fields in Oxygen Vacancy-enriched Ru/NiMoO4-x for Enhanced Hydrogen Spillover in Alkaline Seawater Splitting.

Recently, hydrogen spillover based binary (HSBB) catalysts have received widespread attention due to the sufficiently utilized reaction sites. However, the specific regulation mechanism of spillover intensity is still unclear. Herein, we have fabricated oxygen vacancies enriched Ru/NiMoO4-x to investigate the internal relationship between electron supply and mechanism of hydrogen spillover enhancement. The DFT calculations cooperate with in situ Raman spectrum to uncover that the H* spillover from NiMoO4-x to Ru. Meanwhile, oxygen vacancies weakened the electron supply from Ru to NiMoO4-x , which contributes to dilute the resistance of built-in electric field (BEF) for hydrogen spillover. In addition, the higher ion concentration in electrolyte will promote the H* adsorption step obviously, which is demonstrated by in situ EIS tests. As a result, the Ru/NiMoO4-x exhibits a low overpotential of 206 mV at 3.0 A cm-2 , a small Tafel slope of 28.8 mV dec-1 , and an excellent durability of 550 h at the current density of 0.5 A cm-2 for HER in 1.0 M KOH seawater.

Mn Doping and P Vacancy Induced Fast Phase Reconstruction of FeP for Enhanced Electrocatalytic Oxygen Evolution Reaction in Alkaline Seawater.

Due to the shortage of pure water resources, seawater electrolysis is a promising strategy to produce green hydrogen energy. To avoid chlorine oxidation reactions (ClOR) and the production of more corrosive hypochlorite, enhancing OER electrocatalyst activity is the key to solving the above problem. Considering that transition metal phosphides (TMPs) are promising OER eletrocatalysts for seawater splitting, a method to regulate the electronic structure of FeP by introducing Mn heteroatoms and phosphorus vacancy on it (Mn-FePV ) is developed. As an OER electrocatalyst in seawater solution, the synthesized Mn-FePV achieves extremely low overpotentials (η500  = 376, η1000  = 395 mV). In addition, the Pt/C||Mn-FePV couple only requires the voltage of 1.81 V to drive the current density of 1000 mA cm-2 for overall seawater splitting. The density functional theory (DFT) calculation shows that Mn-FePV (0.21 e- ) has more charge transfer number compared with FeP (0.17 e- ). In-situ Raman analysis shows that phosphorus vacancy and Mn doping can synergistically regulate the electronic structure of FeP to induce rapid phase reconstruction, further improving the OER performance of Mn-FePV . The new phase species of FeOOH is confirmed to can enhance the adsorption kinetics of OER intermediates.

Modulation of Inverse Spinel Fe3 O4 by Phosphorus Doping as an Industrially Promising Electrocatalyst for Hydrogen Evolution.

Fe-based oxides have been seldom reported as electrocatalysts for the hydrogen evolution reaction (HER), limited by their weak intrinsic activity and conductivity. Herein, phosphorus doping modulation is used to construct inverse spinel P-Fe3 O4 with dual active sites supported on iron foam (P-Fe3 O4 /IF) for alkaline HER with an extremely low overpotential of 138 mV at 100 mA cm-2 . The obtained inverse spinel Fe-O-P derived from controllable phosphorization can provide an octahedral Fe site and O atom, which bring about the unusual dissociation mechanisms of two water molecules to greatly accelerate the proton supply in alkaline media. Meanwhile, the ΔGH of the P atom in Fe-O-P as an active site is theoretically calculated to be 0.01 eV. Notably, the NiFe LDH/IF(+) ||P-Fe3 O4 /IF(-) couple achieves an onset potential of 1.47 V (vs RHE) for overall water splitting, with excellent stability for more than 1000 h at a current density of 1000 mA cm-2 , and even for 25 000 s at 10 000 mA cm-2 in 6.0 m KOH at 60 °C. The excellent catalyst stability and low-cost merits of P-Fe3 O4 /IF may hold promise for industrial hydrogen production. This work may reveal a new design strategy of earth-abundant materials for large-scale water splitting.

N-Doped Sandwich-Structured Mo2C@C@Pt Interface with Ultralow Pt Loading for pH-Universal Hydrogen Evolution Reaction.

Designing a unique electrochemical interface to exhibit Pt-like activity and good stability is indispensable for the efficient hydrogen evolution reaction (HER). Herein, we synthesize well-defined Mo2C@NC@Pt nanospheres with a sandwich-structured interface through a facile organic-inorganic pyrolysis and following reduction process. The obtained Mo2C@NC@Pt heterostructures with ultralow Pt loading are composed of well-dispersed Mo2C nanoparticles (NPs) inner layer, N-doped carbon layer, and ultrafine Pt NPs outer layer. Electrochemical measurements demonstrate that Mo2C@NC@Pt heterostructures not only exhibit superior HER activities than commercial Pt/C with small overpotentials of only 27, 47, and 25 mV to achieve a current density of 10 mA cm-2 in acidic, alkaline, and neutral media, respectively, but also possess favorable long-term stability in pH-universal solution. The improved reaction kinetics of Mo2C@NC@Pt heterostructures are mainly attributed to the unique sandwich-structured interface with well-defined Mo2C NPs encapsulated by carbon layers and Pt NPs well-dispersed on the carbon support, synergistic effects among Mo2C NPs, NC, and Pt NPs, high specific surface area, and N-doping into the catalysts. This facile approach not only provides a new pathway for preparing well-defined carbides but also gives insight into the development of low-Pt catalysts for the efficient HER.

Optimized bimetallic nickel-iron phosphides with rich defects as enhanced electrocatalysts for oxygen evolution reaction.

Exploring low-cost and outstanding bimetallic phosphides to substitute noble metals as electrocatalysts for oxygen evolution reaction (OER) in alkaline media is essential for renewable energy technologies. Herein, bimetallic nickel-iron phosphides nanoparticles (P-NiFe-800 NPs) with rich defects have been synthesized through gas annealing at 800 °C and phosphorization using uniform nickel-iron nanocubes (NiFe NCs) as precursor. At optimized calcination temperature, the obtained P-NiFe-800 NPs are composed of uniform nanoparticles with the rough surface, which suggests the larger surface area and more exposed rich active sites than other samples for OER. The introduction of P element to binary nickel-iron metals can optimize the crystalline and electronic structures of NiFe NCs and thus enhance electrocatalytic properties. Owing to the distinct morphological structure and synergistic effect between nickel-iron and phosphorus, P-NiFe-800 NPs demonstrate superior electrocatalytic activities for OER with lower overpotential of 270.1 mV to achieve a current density of 10 mA cm-2, smaller Tafel slope of 39 mV dec-1, lower electrochemical impedance spectroscopy (EIS) value, bigger determined double-layer capacitance (Cdl) of 2130 uF cm-2 and prominent stability than NiFe NCs, NiFe-600 NPs, NiFe-700 NPs, NiFe-800 NPs, NiFe-900 NPs, P-NiFe NCs, P-NiFe-600 NPs, P-NiFe-700 NPs and P-NiFe-900 NPs. The optimized phosphorization is helpful for fabricating the bimetallic phosphides as efficient catalysts for OER.

Pt-C Interfaces Based on Electronegativity-Functionalized Hollow Carbon Spheres for Highly Efficient Hydrogen Evolution.

The hydrogen evolution reaction activity of carbon-supported Pt catalyst is highly dependent on Pt-C interfaces. Herein, we focus on the relationships between Pt activity and N/O-functionalized hollow carbon sphere (HCS) substrate in acidic media. The electrochemical dissolution of Pt counter electrode is performed to prepare Pt nanoparticles in low loading. The N groups are beneficial for homogeneously sized Pt nanoparticles, whereas the O groups lead to aggregated nanoparticles. Moreover, the proper electronegativity of the N groups may enable capturing of protons to create proton-rich Pt-C interfaces and transfer them onto the Pt sites. The O groups may also capture protons by hydrogen bonding, but the subsequent release of protons is more difficult due to a stronger electronegativity and result in an inferior Pt activity. Consequently, the N-doped HCS with a low Pt loading (1.7 µg cm-2 and 0.05 wt %) possesses a higher intrinsic activity compared with Pt on O-doped HCS. Moreover, it outperforms the commercial 20% Pt/C with a stable operation for 12 h. This work may provide suggestions for constructing the advantageous Pt-C interfaces by proper functional groups for high catalytic efficiencies.

Tuning the morphology and Fe/Ni ratio of a bimetallic Fe-Ni-S film supported on nickel foam for optimized electrolytic water splitting.

The surface composite and morphology of binary metal sulfides are the key for efficient overall water splitting. However, tuning the morphology and surface composition of binary metal sulfides in a facile way is still a challenge. Herein, binary Fe-Ni sulfides supported on nickel foam (FeNi-S/NF) with different morphology and composition ratio of Fe/Ni have been synthesized through a facile one-step electrodeposition assisted by liquidcrystaltemplate (LCT). The binary FeNi-S has improved activity and conductivity compared to single metal sulfides. LCT-assisted porous FeNi-S film composed of uniform nanospheres is obviously different from planar film electrodeposited in water solution. LCT-assisted FeNi-S nanospheres are covered by many interwoven nanosheets, implying more exposed active sites for water splitting. Furthermore, the different Fe/Ni ratios of FeNi-S/NF samples have been systematically studied to explore the influence of Fe-incorporation on intrinsic activity of FeNi-S/NF. And the sample with Fe/Ni ratio (3/1) demonstrates the best activity and excellent stability for overall water electrolysis. Therefore, our work provides a facile and controllable access to binary metal sulfides with excellent performances for overall water splitting.

Hydrogen Evolution Activity of Ruthenium Phosphides Encapsulated in Nitrogen- and Phosphorous-Codoped Hollow Carbon Nanospheres.

RuPx nanoparticles (NPs) encapsulated in uniform N,P-codoped hollow carbon nanospheres (RuPx @NPC) have been synthesized through a facile route in which aniline-pyrrole copolymer nanospheres are used to disperse Ru ions followed by a gas phosphorization process. The as-prepared RuPx @NPC exhibits a uniform core-shell hollow nanospherical structure with RuPx NPs as the core and N,P-codoped carbon (NPC) as the shell. This strategy integrates many advantages of hollow nanostructures, which provide a conductive substrate and the doping of a nonmetal element. At high temperatures, the obtained thin NPC shell can not only protect the highly active phase of RuPx NPs from aggregation and corrosion in the electrolyte but also allows variation in the electronic structures to improve the charge-transfer rate greatly by N,P codoping. The optimized RuPx @NPC sample at 900 °C exhibits a Pt-like performance for the hydrogen evolution reaction (HER) and long-term durability in acidic, alkaline, and neutral solutions. The reaction requires a small overpotential of only 51, 74, and 110 mV at 10 mA cm-2 in 0.5 m H2 SO4 , 1.0 m KOH, and 1.0 m phosphate-buffered saline, respectively. This work provides a new way to design unique phosphide-doped carbon heterostructures through an inorganic-organic hybrid method as excellent electrocatalysts for HER.

Nitrogen, phosphorus dual-doped molybdenum-carbide/molybdenum-phosphide-@-carbon nanospheres for efficient hydrogen evolution over the whole pH range.

MoO42-@aniline-pyrrole (MoO42-@polymer) spheres as precursors have been used to synthesize unique core-shell nanostructure consisting of molybdenum carbide and molybdenum phosphide composites encapsulated into uniformly dual N, P-doped carbon shells (Mo2C/MoP@NPC) through a facile two-step strategy. Firstly, porous core-shell N-doped Mo2C@C (Mo2C@NC) nanospheres have been synthesized with ultrafine Mo2C nanoparticles as core and ultrathin NC as shell by a annealing route. Secondly, Mo2C/MoP@NPC has been obtained maintaining intact spherical-like morphology through a phosphidation reaction in high temperature. The synergistic effect of Mo2C and MoP may reduce the strong MoH bonding energy of pure Mo2C and provide a fast hydrogen release process. In addition, the dual N, P-doped carbon matrix as shell can not only improve the electroconductivity of catalysts but also prevent the corrosion of Mo2C/MoP nanoparticles during the electrocatalytic process. When used as HER cathode in acids, the resulting Mo2C/MoP@NPC shows excellent catalytic activity and durability, which only needs an overpotential of 160 mV to drive 10 mA cm-2. Moreover, it also exhibits better HER performance in basic and neutral media with the need for overpotentials of only 169 and 228 mV to achieve 10 mA cm-2, respectively. This inorganic-organic combination of Mo-based catalysts may open up a new way for water-splitting to produce large-scale hydrogen.

In situ cathodic activation of V-incorporated NixSy nanowires for enhanced hydrogen evolution.

In situ cathodic activation (ISCA) of V-incorporated NixSy nanowires supported on nickel foam (VS/NixSy/NF) can be realized in an alkaline hydrogen evolution reaction (HER) process, which provides not only clearly enhanced activity but also ultrahigh stability for HER. The ISCA process is continuous linear sweep voltammetry (LSV) on VS/NixSy/NF as a cathodic electrode with gradually enhanced HER activity. The activated VS/NixSy/NF (A-VS/NixSy/NF) demonstrates enhanced HER activity with an overpotential of 125 mV to drive 10 mA cm-2, which is much lower than that of other samples. It may be predicted that the ISCA-derived amorphous VOOH film covering on A-VS/NixSy/NF accelerates the HER process, and NiOOH may protect active sites from decaying, leading to excellent activity and structural stability. However, for single metal sulfides, the ISCA process of nickel or vanadium sulfides is not available, implying that the synergistic effect between Ni and V of VS/NixSy/NF may be the key to drive ISCA in alkaline HER. In addition, its ultra-high stability confirms that the stable active sites and nanostructures of A-VS/NixSy/NF are derived from ISCA. Therefore, the ISCA of V-incorporated transition metal sulfides in the alkaline HER process may be a facile and promising method to obtain efficient electrocatalysts.